How To Charge A Fitbit Watch Or Tracker The Complete Guide

The Versa 3 uses a magnetic charging cable, so you’ll want to use this method instead.

To remove the band from Fitbit Blaze, gently push the screen until it detaches from its frame. For the Fitbit Flex and Flex 2, simply bend the rubberize wristband and lift the charger away. [1] X Research source If you have a Fitbit One, bend the rubberized clip slightly and pry out the tracker. [2] X Research source

Fitbit Blaze: Align the 4 gold prongs on the charging cradle with the backside of the tracker, then place the tracker inside of the charging cradle. Once connected, close the cover of the cradle. You’ll see a battery icon once the tracker is charging. Fitbit Versa, Versa Lite, and Versa 2: Pinch the clip on the charging cradle until it expands to size, then place the tracker into the cradle with the gold pins aligned. The battery percentage appears on the screen once connected. Fitbit Flex, Flex 2, and Fitbit One: Look inside the opening of the charging cable and you’ll see some gold contacts. Line up the contacts on the tracker to those in the charging cable, then gently push the tracker in until it clicks into place and is snug inside the housing.

Fitbit Blaze: The battery indicator will turn green once fully charged. Fitbit Flex: You’ll see 5 simultaneous lights on the face once the tracker is fully charged. Fitbit Flex 2: While the Flex 2 is charging, a white light will represent 25% of the maximum charge. Once the Flex 2 is fully charged, a green light will appear alongside 4 white lights for a second, and then all lights will turn off. Fitbit Versa, Versa Lite Edition, and Versa 2: Swipe down from the top of the screen to check the battery indicator at the top-left. Fitbit One: Press the button on your tracker to display the charging status.

The charging cable for the Fitbit Charge 5 and Fitbit Luxe are identical and can be used to charge either tracker. All other magnetic Fitbit chargers are unique to each model. The Fitbit Ace 2, Inspire, and Inspire HR chargers are identical and can be used to charge either device. [4] X Research source Fitbit Sense and Versa 3 use identical charging cables. Most other Fitbit charging cables are not interchangeable.

Because the charger is magnetic, it’ll only lock into place when the magnets are properly aligned. If you feel resistance, just rotate your tracker to align the magnets.

Fitbit Charge series cables are not cross-compatible—the Charge 4 cable cannot charge the Charge 3 or Charge 2, and vice-versa. If you have a Fitbit Charge 5, see this method instead. You don’t have to remove your tracker from the band to charge your tracker.

When your Fitbit Ace, Alta, or Charge 2 is fully charged, the battery icon will appear solid. When your Charge 3 or Charge 4 battery is charged, a battery icon with a smiley face will appear on the screen.

You don’t have to remove your Fitbit tracker from the band to charge it.

It takes 1-2 hours to fully charge Ace 3 and Inspire 2. [5] X Research source

You can use any micro-USB 2. 0 charger to charge your Fitbit Flyer headphones. The Fitbit Surge charging cable is not compatible with other Fitbit devices.

Fitbit Surge Connect the charging cable to the back of the wristband. On the rear side of the wristband, you will see a small port with several gold contacts. Connect the small end of the cable to the port. Fitbit Flyer: Lift the port cover to reveal the charging port, then insert the smaller end of the charging cable.

To clean your Fitbit’s contacts, you’ll need a small amount of rubbing alcohol and a soft toothbrush. Do not use anything made of metal to scour the contacts, as metal can damage and corrode the plating. [8] X Research source If the contacts aren’t shiny, dip the toothbrush or swab into the rubbing alcohol and then swab dirt and debris from the contacts. To clean the charging cable, unplug it from the power source, then use a cotton swab dipped in alcohol to gently swab away dirt and grime. Make sure not to leave any cotton behind. Dry your tracker and charging cable with a lint-free cloth before wearing your Fitbit.

Ace and Alta series: Connect the tracker to a charger, press the button on the charging cable 3 times (with a few seconds between each press), and then disconnect the tracker once you see the Fitbit logo. [9] X Research source Ace 2, Ace 3, and Inspire Series: Connect the tracker to a charger, press and hold the button or buttons on the tracker for 5 seconds, and then release. [10] X Research source Charge 3 and Charge 4: Open the Settings app and select About > Reboot Device. Charge 5 and Fitbit Luxe: Swipe down on the clock face, tap Settings, choose Restart Device, then tap Restart. Ionic, Sense, and Versa: Press and hold the button for 10 seconds. Release when you see the Fitbit logo. Fitbit Surge: Press and hold the Home and Select buttons for 10-15 seconds until the screen flashes or the light starts to dim. Wait 10 seconds after the device turns off, then press the Home button to turn it back on. For other models not currently supported by Fitbit, search Google for your model and “restart. "