How Do I Check My DNS Settings?
Checking DNS settings is different depending on the type of device you’re using. Windows and macOS allow you to review and change your DNS settings through the Windows Control Panel and macOS Preferences, respectively, but you can also check and test DNS through the Command Prompt or Terminal. Other devices, like game consoles, sometimes have options to check or test your DNS settings that are usually in a network settings menu.
How Do You Check if DNS Is Working?
If you’re using a device like a computer, tablet, or phone, there are a few ways to check if DNS is working. If you don’t have any trouble visiting websites, your DNS is probably working just fine. If you suspect there might be an issue, you can use a DNS testing website to verify that your DNS settings are working.
Here’s how to check if your DNS is working with a DNS testing site:
Navigate to the DNS leak test site. Click Standard test. Check the ISP column. If the ISP column lists the correct DNS, your DNS is working. For example, we set the computer used to run this test to use Google DNS servers, which you can see in the ISP column. If you don’t see the correct DNS, double-check the DNS settings on your device. You may also need to change the DNS settings on your router.
You can also check if your DNS is working in Windows using the Command Prompt and macOS using Terminal. Other devices that rely on internet access, like game consoles, include built-in functionality to check if your DNS is working.
How Do I Check My DNS Settings in Windows?
You can change your DNS settings in Windows in the Network and Sharing Center in the Control Panel, and you can also check your current settings there. If you want to check your DNS settings and check if your DNS is working, you can do that through the Command Prompt.
Here’s how to check DNS settings in Windows and see if your DNS is working:
Open the Command Prompt. Type ipconfig /all and press Enter. Look for the DNS Servers entry to check your DNS settings and verify that they are correct. If you don’t see the correct DNS servers, double check your DNS settings in the Network and Sharing Center. Type nslookup lifewire. com and press Enter. Verify that the correct IP addresses are displayed. If you see a message like Host (website address) not found, that may indicate a problem with your DNS servers. Try changing to different DNS servers and check again.
How Do I Check My DNS Settings in macOS?
You can change your DNS settings on a Mac through Network settings in the Preferences menu, and you can also check your current DNS settings in the same place. You can also check and test your DNS on a Mac by entering commands into the Terminal.
Here’s how to check and test DNS in macOS through the Terminal:
Open Terminal. Type scutil –dns | grep ’nameserver[[0-9]*]’ and press Enter. Your current DNS servers will be displayed in the terminal. If you see the incorrect servers listed, check your network settings. Type dig lifewire. com and press Enter. Verify that the correct IP addresses are displayed. If the incorrect IP addresses are displayed, or you see an error, try switching to different DNS servers.
How to Verify DNS Settings on a PlayStation
Here’s how to verify your DNS settings on a PlayStation 4 (with PlayStation 3 settings in parentheses):
Navigate to Settings. Select Network (Network Settings on PS3). Select Set Up Internet Connection (Internet Connection Settings, then OK, then Custom). Choose Use Wi-Fi (Wireless) if you are connected wirelessly, or Use a LAN Cable (Wired Connection) if you’re using an ethernet cable. If you are using Wi-Fi: Under Use Wi-Fi, select Custom (WLAN section, Enter Manually, then press right on the d-pad to select IP Address Setting)Select your Wi-Fi network. If you are using ethernet: Select Custom (Auto-Detect) for the Operation mode. Choose Automatic for the IP Address Settings. Choose Do Not Specify (Do Not Set) for the DHCP Host Name. Choose Automatic for the DNS Settings. Choose Automatic for the MTU Settings. Choose Do Not Use for the Proxy Server (then Enable for UPnP, then save settings with the X button) Choose Test Connection.
How to Check DNS On an Xbox 360
Here’s how to set and check your DNS settings on an Xbox 360:
If you are using Wi-Fi:
Under Use Wi-Fi, select Custom (WLAN section, Enter Manually, then press right on the d-pad to select IP Address Setting)Select your Wi-Fi network.
If you are using ethernet:
Select Custom (Auto-Detect) for the Operation mode.
Press the Guide button on your controller. Navigate to Settings > System Settings. Select Network Settings. Locate your network and select Configure Network. Select DNS Settings > Automatic. Shut down your Xbox 360, and then turn it back on. heck to see if online apps and games work.
How to Check DNS on Xbox One and Xbox Series X/S
Here’s how to check your DNS settings on an Xbox One or Xbox Series X/S:
Press the Menu button and select Settings > All Settings. Select Network. Select Network settings. Select Advanced settings. Select DNS settings. Select Automatic. Press the B button. Check to see if online apps and games work.
