Take note of alternative speaker locations, such as the side near the volume button or on the bottom of the phone’s front face. You may want to clean your phone screen first to remove any excess debris.
Switch cotton swabs when they get dirty. For better results, dab a small amount of rubbing alcohol onto your cotton swab. [3] X Expert Source Mitch HarrisConsumer Technology Expert Expert Interview. 31 August 31 2021.
Move your sticky tac around so that you’re always using its clean surface. Purchase sticky tac from office supply stores or online suppliers.
Angle the brush upward and scrub with the bottom bristles for tough dirt. Always use a medium bristle brush—soft bristles aren’t good enough to remove dirt, while the stronger ones are too thick to reach into the small speaker holes.
Purchase a can with a straw for increased accuracy. This is also a great way to clean a television screen.
Tighten the straw if you can feel air coming out of the sides of the nozzle as you spray. Skip the straw if you’re comfortable aiming your compressed air can without it.
Don’t blow too close to the speaker or you can damage the phone’s internal electrical components. If you’re using the straw, hold it with your non-dominant hand to keep it steady as you blow air.
You can purchase a spudger—a tool with a wide flat-head screwdriver end that is used as a wedge—from home hardware stores If you’re having trouble, apply more heat to the perimeter to loosen the glue holding to two phone pieces in place. With older and cheaper phone models, you can pry the back off with your hands. For newer and more expensive phones with glass backs, this isn’t possible.
Gently pry the speakers out using a spudger if you’re having trouble.
You can also use a soft cloth or lint-free paper towel. However, they are not as effective at picking up dirt. Be sure to let the speakers and openings dry before putting your speaker back together.
Pull off the plastic film covering the screws if your phone has one. Once the second back piece is off, you can access and clean speaker openings and speakers. However, in some cases you will only be able to clean the openings. Snap the back piece back on when you’re finished cleaning the speakers and reattach the screws. Afterward, you can reattach the metal covers to the speakers and snap the back lid back on.
If you have an Android device, be sure to take out the battery and SIM card if you’re able.
If you don’t have silica gel packs, you can use dry, uncooked rice or another drying agent instead.
If you don’t have silica gel packs, you can use dry, uncooked rice or another drying agent instead.
Do not expose your phone to direct sunlight for an excessive amount of time. When there is no condensation in the bag, you can remove the device.
If you find that there is water lingering in your speakers, use the next method.
Use this method if you have water in your speaker and your charging port is not damaged. The tones will generate sound waves that can eject the water from your device.
There are a variety of tones marketed towards removing water from your speakers. If this tone does not work for your device, you can use the search bar to find another similar video.
