”W” means you must use a water-based solution. ”S” means you must use a solvent-based cleaner. ”S-W” means you can use either a water-based or solvent-based cleanser. ”X” means you can only use a vacuum. (No water or solvent-based cleansers of any kind).
Water-based cleansers include: gentle soap, mild dish detergent, carpet cleaner, and upholstery shampoo Solvent-based cleansers include: rubbing alcohol, clear alcohol like gin or vodka, and dry-cleaning solvents. Once again, if you have an “X” tag, do not use water or solvent-based cleansers.
Use an upholstery attachment to lift out dirt as best you can. If you do not have an upholstery attachment, you can use a dry bristle brush.
Dab a bit of cleanser onto a sponge or washcloth, and apply it to an inconspicuous location. Wait 15-20 minutes for this area to dry. If there is no stain or spot, you can go ahead and use this product.
Use the blow dryer on its lowest, coolest setting. Hold the blow dryer 6” away from the fabric.
After your furniture is clean and dry, grab a dry bristle brush. Rub the fabric in a circular motion all over the furniture. You should be able to watch the fabric become fluffier and more attractive as you go!
Holding the can upright, keep the nozzle about 6” away from the fabric. Release the spray using a slow, sweeping motion. Allow to dry. Add a second coat. Remember: two light coats are better than one heavy coat. Reapply after every cleaning.
