If you notice loose or wiggling pieces, take your jewelry to a professional to have the piece repaired. Use a resealable plastic bag to transport it so that nothing gets lost along the way.
If your jewelry is really dirty, add 3-4 drops of ammonia to the soapy water. Don’t use hot water to clean your jewelry.
If your jewelry has pearls or onyx stones, don’t soak it. Rather, wrap the metal parts in a soft cloth that has been soaked in warm, soapy water. [2] X Research source
The baking soda and brush will reach those tiny crevices, and it’ll also make your pieces brighter. If your jewelry is really dirty, you could sub out the water for 1⁄2 cup (120 mL) of white vinegar instead.
Either plug the sink or rinse the items out over a colander to prevent losing anything down the drain.
You could also use a special jeweler’s cloth, if you have one.
Excessive cleaning can wear down the rhodium plating more quickly, so make sure to avoid abrasive cleaning products.
Lots of common jewelry cleaning products shouldn’t be used on white gold because they’ll eat away at the rhodium plating.
Depending on what you’re having done, replating will cost anywhere from $40 to $135.
Keep white gold away from high heat. Don’t store it near a heating vent or radiator.
Keep white gold away from high heat. Don’t store it near a heating vent or radiator.
If you’re out at a public pool, store your jewelry in the glovebox of your car, or put it down inside a bag to keep it safe. You should also consider taking off any white gold pieces, like rings, when you shower. Soap scum and hard water can build up on pieces over time.
If you don’t want to wear gloves, just remember to take off your white gold rings before cleaning.
