How to Connect to WiFi Network using WPS on Android
Wi-Fi Protected Setup, abbreviated as WPS, makes a connection between the router and the device faster and easier. It was introduced in 2006 by Cisco. It is a network security standard that works for wireless networks encrypted with a password. But these passwords must be encrypted with WPA Personal or WPA2 Personal security protocols. This feature enables the router owner to restrict strangers from using their wireless network. People prefer this feature because this does not include entering long passwords while connecting. There are four different modes as
How to Connect to WiFi Network using WPS on Android Pros of WPS Cons of WPS Steps to Connect to A Wi-Fi Network Using WPS
Push button, PIN, USB, and near-field communication modes
The last two are out-of-band modes, but the first two are mostly used.
Pros of WPS
Following are the pros of using WPS.
It will automatically configure the network name and security key. It is not required to know the security key or password for the wireless network. The security key is generated by WPS, making it more secure. The security key is encrypted by Extensible Authentication Protocol.
Cons of WPS
Below are a few cons of using WPS.
Not all devices or routers support WPS, that is, the device with WPS Android 9 and more. One cannot connect using WPS if the device is not verified with WPS certification. It does not support direct connections, whereas the connections are made through AP.
Also Read: What is WPS and How Does it Work?
Steps to Connect to A Wi-Fi Network Using WPS
To connect the WPS push button Android, you need to ensure that:
The router and your mobile version support the WPS feature. The WPS button on your router is enabled.
Follow the below steps to connect the WPS to your device.
Note: Since smartphones don’t have the same settings options, and they vary from manufacturer to manufacturer. Hence, ensure the correct settings before changing any. The screenshots used in this article are taken from OnePlus Nord.
Launch the Settings app on your device.
Here, tap the Wi-Fi & Network option.
Then, tap on the Wi-Fi option.
Now, tap Wi-Fi preferences under the Wi-Fi Settings category.
Finally, tap on the WPS Push button.
Note 1: If there is no WPS button on your Android device, then tap WPS Pin Entry to connect using an eight-digit pin in the router control panel.
Note 2: If your device and router support WPS and you can’t connect to the WPS, then try moving closer to the router.
Q1. Does WPS reduce the speed of the network?
Ans. No, but it may slow down the speed of the network occasionally.
Q2. Does WPS to be connected every time we use Wi-Fi?
Ans. No, connecting to the router using WPS is a one-time process. You get connected to the network whenever you turn it on.
Q3. Is it safe to connect using WPS?
Ans. Though the method is faster and easier, it is not secure. A hacker can find gain access to all your connected devices. So, it is recommended to disable WPS.
Recommended:
What Happened to LimeTorrents? 11 Best WiFi Temperature and Humidity Sensor How to Enable Desktop Mode on Android Browsers How to Open Android Phone Settings Menu
We hope that this guide will help you to connect your mobile to Android WPS. Drop your queries and suggestions in the comment section below, if any.
